Banner Chair Prototype 3

 BANNER CHAIR:

This is our third (and final) attempt at creating our own banner chair!!!

The nails that we used were about this length.

Banners!

Use a saw and cut the poles.

Make sure the poles are of equal lengths - use a measuring tape to do so!

Then use a drill to drill holes into the poles

 We will drill the nails into the poles

Saw out portions of the poles that are about 5.5CM

They form the legs of the chair

More sawing!

 

 More drilling

We also used a hammer to hammer the nails in

Connect the poles together

HAMMER!

Meanwhile, the girls started to cut the banners into our desired shape and size for the chair. 

Measure using the measuring tape and use a marker to draw out the shape and size you want. 

THEN START USING YOUR SCISSORS TO CUT!

Binding the legs together.

LIKE THIS!

Putting the banner on top

We used musking tape to tape the banner because we didn't have a staple gun.
We suggest for all to use a staple gun because it will be more lasting and stronger than using tape.

TADAH, DONE!!!! :)
& THATS RYAN SITTING ON IT!!

Our third attempt took up about 6 hours to complete and was the biggest prototype we made. Based on the time taken to construct the chair, we conclude that the banner chair is not very difficult to make. :)